Engineering, Gardening

Smart Gardening #4: Power on 1st prototype board

Prototype Highlight:

Powered on prototype board successfully from USB power. LCD display was powered on at 5V. The light sensor has LED indicators showing power GOOD. Using a multimeter, measured 5V power pins on the prototype board and everything is okay so far.

Next step is start programming with Arduino!

smart_gardening_prototype_ver1.png

Recap from last time:

Detailed Progress:

Arduino micro has operating voltage at 5V. I like this because most LCD displays need 5V not 3.3V. Te DC current per IO pin is 20mA at 5V and 50mA at 3.3V, which is adequate for most sensors. Reference: https://store.arduino.cc/usa/arduino-micro

arduino_micro_spec
Arduino Micro Specification

Today, I just powered on the prototype board ver 1 by a microUSB cable connected to a Desktop PC. The multimeter showed 4.96V on one of the sensor power supply pin.  This is because there is a on-board voltage regulator on Arduino micro board and the 5V pin may not be exactly 5V due to dropout voltage. If the dropout voltage was too big, this may cause the Arudino and other sensors unstable. So far, it doesn’t seem to be a problem.

Next Steps:

  • Start using Arudino IDE on Windows PC
  • Programming Arduino for LCD Display first

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s